Skip to main content

Fonts in Scientific Figures: Sizes, Embedding, and Journal Rules (2026)

FigPadNov 22, 2026
Fonts in Scientific Figures: Sizes, Embedding, and Journal Rules (2026)

For most journals in 2026, set figure text in Arial or Helvetica, keep one typeface across all figures, and check the target journal's point-size range before you export. The ranges differ a lot. Nature's guide asks for a maximum of 7 pt and a minimum of 5 pt for general figure text, with 8 pt bold panel labels. PLOS ONE asks for Arial, Times or Symbol at 8–12 pt. Elsevier's artwork page lists Arial (or Helvetica), Courier, Symbol and Times as the recommended fonts and asks for fonts to be embedded in EPS exports. Because these numbers conflict, size your text at the final printed width of the journal you are targeting, not at screen size, and embed or outline fonts so the file looks the same on the publisher's machine.

What do the publishers say about figure fonts?

These are the pages we opened on 22 November 2026. Journal-level pages may lag publisher policy, so always confirm in the guide for authors of the specific journal.

  • Nature (final submission guide): "Lettering should be in a sans-serif typeface, preferably Helvetica or Arial, the same font throughout all figures in the paper." Separate panels in multi-part figures should be labelled with 8 pt bold, upright (not italic) a, b, c. "Maximum text size for all other text should be 7 pt; minimum text size should be 5 pt." Line weights should be between 0.25 and 1 pt at the final size, and Nature asks authors not to rasterize or outline these lines if possible.
  • PLOS ONE (figure guidelines): text within figures should use "Arial, Times, or Symbol font only in 8-12 point." For EPS files, PLOS says to embed fonts, or convert them to outlines to prevent missing or improperly rendered text, and notes that outlined text can no longer be edited.
  • Elsevier (artwork overview): to make the published version match your source file, use only the recommended Type 1 or TrueType fonts where possible: Arial (or Helvetica), Courier, Symbol, and Times (or Times New Roman). Non-standard fonts may be substituted by Elsevier, which can lead to missing symbols or overlapping type. For EPS export, the page says to choose for all fonts to be embedded.
  • Science (AAAS) and Cell Press: we could not read their figure pages with our automated fetch on 22 November 2026 (the Science page returned an access error), so we make no font claim about them. Check them directly; our Cell Press figure guidelines post covers what we could verify there on an earlier date.

Figure font size by journal: comparison table

Nature PLOS ONE Elsevier
Typeface Sans-serif, preferably Helvetica or Arial, same font in all figures Arial, Times or Symbol only Arial (or Helvetica), Courier, Symbol, Times (or Times New Roman) recommended
Text size Maximum 7 pt, minimum 5 pt (other than panel labels) 8–12 pt No point range found on the page we read
Panel labels 8 pt bold, upright a, b, c Covered by the 8–12 pt rule Not specified on this page
Font embedding Not specified in the section we read Embed fonts in EPS, or convert to outlines Embed all fonts when exporting EPS
Line weight 0.25–1 pt at final size Not covered here Not covered here
Source Nature PLOS ONE Elsevier

Checked 22 November 2026. A blank or "not specified" cell means we did not find a rule on the page we read, not that no rule exists. Note that Nature's range tops out at 7 pt while PLOS ONE's starts at 8 pt, so a single figure cannot satisfy both without resizing the text.

What font size should I use in a figure?

There is no universal number, so work backwards from the journal. Decide the final printed width of the figure (single column or full width), then set the text so it lands inside the journal's range at that width. If you draw a figure larger and let the journal shrink it, the text shrinks too: a label set at 10 pt on a canvas that is later scaled to half width ends up near 5 pt. Setting sizes at final dimensions avoids that surprise.

A practical default when you have no target yet: one sans-serif font (Arial or Helvetica), panel labels slightly larger and bold, and all other text in a narrow band of sizes. Then adjust to the journal's rule before submitting. Nature's guide also suggests checking at the smallest possible size that lettering remains readable and lines are heavy enough to print clearly.

Which fonts are safe for scientific figures?

Across the three publishers above, Arial (or Helvetica) is the one typeface on every list: Nature prefers it, PLOS ONE allows it, and Elsevier recommends it. Times and Symbol are allowed by PLOS ONE and Elsevier. Elsevier also lists Courier, and Nature mentions Courier for amino-acid sequences in one-letter code.

Unusual fonts are where problems start. Elsevier says non-standard fonts may be replaced, with missing symbols or overlapping type as possible results. For Greek letters and special characters, use a font that actually contains them, then check the exported file rather than the editor view.

How do I embed fonts, or convert text to outlines?

Embedding stores the font data inside the file so the publisher sees the same letterforms you drew. Outlining converts text into shapes, which removes any font dependency but also removes editability.

  • Embed: when exporting EPS or PDF, choose the option that includes or embeds all fonts. Elsevier's page says exactly this for EPS export.
  • Outline: PLOS ONE offers this as the alternative for EPS files. In Illustrator or Inkscape you convert text to outlines, and PLOS warns that you will not be able to change the text afterwards, so keep an unoutlined master copy.
  • Check: open the exported file in a different program or on another computer and confirm that every label, Greek letter and symbol appears. Nature's separate advice about line weights goes the other way: it asks you not to rasterize or outline the lines if possible.

Raster formats such as TIFF avoid font problems because the text is already pixels, at the cost of editability and sharpness at large sizes. Our guide to SVG vs PNG vs TIFF vs EPS for journal figures compares those trade-offs, and the journal figure DPI requirements post covers resolution.

How do I fix fonts when a reviewer or editor asks?

Most font rejections come down to three things: the wrong typeface, text outside the allowed size range, or missing fonts in the file. If your figure is a flat image, changing a label means retouching pixels. If it keeps text as live text in a vector file, you change the font or size and re-export.

FigPad exports figures as layered SVG, where text stays as text and can be edited in FigPad's canvas, Illustrator or Inkscape. FigPad's pricing page lists layered SVG export on every plan, including the free one (checked 22 November 2026). Our layered SVG post explains what that means in practice. Whatever tool you use, check the exported file against the journal's rules before submitting. For the full guideline walk-through at one journal, see our Nature figure guidelines post.

If you use any AI tool to make a figure, check the target journal's policy on AI-generated images and disclose where required. Generated figures must never be presented as primary experimental data.

FAQ

Is Arial or Helvetica better for journal figures? Journals treat them as interchangeable. Nature says "preferably Helvetica or Arial" and Elsevier lists "Arial (or Helvetica)". Pick one and use it throughout.

Can I use a serif font such as Times in a figure? Some publishers allow it. PLOS ONE lists Times and Elsevier lists Times (or Times New Roman). Nature asks for a sans-serif typeface for lettering, so Times would not fit its guide.

Do I have to embed fonts in a PDF or EPS? Elsevier says to embed all fonts when exporting EPS, and PLOS ONE asks you to embed fonts or convert them to outlines in EPS files. We did not find a font-embedding instruction in the Nature section we read, so check the guide for authors of your journal.

Does the point size apply to the canvas or the printed figure? Journals state sizes for the figure as printed, so measure text at the final width. Scaling a figure after you set the text changes the effective size.

Where is the rule for my journal if it is not listed here? Open the journal's own guide for authors or artwork page. We only list rules we could read on 22 November 2026.

Start making professional scientific figures today.