For most journal submissions in 2026, use a vector format (EPS or PDF) for charts, diagrams and line art, and TIFF for photographs and other pixel images. Of the three publisher pages we read, none lists SVG or PNG as an accepted figure format: Nature prefers vector EPS or PDF (or AI/PostScript) for line art and layered PSD or TIFF for photographs; Elsevier recommends EPS, PDF, TIFF or JPEG; and PLOS ONE accepts only TIFF or EPS. SVG is the format most figure tools export, so the practical workflow is: build and edit in SVG, then convert to the format your journal asks for. We read all three pages on 16 November 2026. Your target journal's own guide for authors can override a publisher-level page, so check it before you export.
What do the publishers actually accept?
These are the pages we opened on 16 November 2026:
- Nature (final submission guide): preferred formats are layered Photoshop (PSD) or TIFF at 300–600 dpi for photographic images, and Adobe Illustrator (AI), PostScript, vector EPS or PDF for figures with line drawings and graphs, including those combining text and line art with photographs. If those are not possible, Nature says it can also accept high-resolution JPEG (300–600 dpi), CorelDraw (up to version 8), and Microsoft Word, Excel or PowerPoint files. It asks authors not to rasterize line art or text, and to supply "editable, unflattened vector artwork" where possible. Photographs must be at least 300 dpi at the maximum size they will be used. For Extended Data files, the page says to save each figure as JPEG (preferred), TIFF or EPS.
- Elsevier (artwork overview): recommends EPS, PDF, TIFF or JPEG, and also accepts Microsoft Office files. EPS is described as the preferred format for vector graphics, TIFF as the recommended format for bitmap (line art), grayscale and colour halftone images made only of pixels, and JPEG as acceptable for grayscale and colour halftones such as photographs and micrographs. For fonts it recommends Arial (or Helvetica), Courier, Symbol and Times (or Times New Roman). Journal-specific instructions can go beyond these common guidelines.
- PLOS ONE (figure guidelines): its summary says file format TIFF or EPS, width 789–2250 pixels at 300 dpi, maximum height 2625 pixels at 300 dpi, resolution 300–600 dpi, file size under 10 MB, and text within figures in Arial, Times or Symbol. TIFFs must be flattened with LZW compression and no alpha channels. For EPS, embed fonts or convert text to outlines. PLOS says TIFF "tends to be easier to work with than EPS" and that EPS files often have missing or corrupted fonts. If you assemble figures in a vector tool such as Illustrator or Inkscape, PLOS asks for an export to EPS.
We could not read the Science (AAAS) and Cell Press figure pages for this article, because both returned an access error to our automated fetch on 16 November 2026. We therefore make no claim about them here. Check them directly if you are targeting those journals; our Science/AAAS checklist covers the Science side.
SVG vs PNG vs TIFF vs EPS: what is each one for?
| Format | Type | What it is good for | On the pages we read (16 Nov 2026) |
|---|---|---|---|
| SVG | Vector (XML text) | Editing and reuse: scalable shapes, real text, easy to restyle | Not listed by Nature, Elsevier or PLOS ONE on the pages above; PLOS mentions it only as an export option inside a chemistry tool, and still asks for TIFF or EPS |
| EPS | Vector (PostScript) | Charts, diagrams, line art | Nature: vector EPS preferred for line art. Elsevier: preferred for vector graphics. PLOS ONE: accepted |
| TIFF | Raster | Photographs, micrographs, any figure that must be pixels | Nature: preferred for photographs (300–600 dpi). Elsevier: recommended for bitmap images. PLOS ONE: accepted, flattened, LZW |
| PNG | Raster (lossless) | Screenshots, web and slides | Not listed by any of the three pages |
| Vector or mixed | Vector figures with embedded fonts | Nature and Elsevier list it; PLOS ONE does not list it as a figure format | |
| JPEG | Raster (lossy) | Photographs when nothing else is possible | Nature: acceptable fallback. Elsevier: accepted for halftones. Not listed by PLOS ONE |
"Not listed" means we did not find the format on those pages, not that a journal will reject it. Some journals do take other formats, so confirm in your own journal's guide for authors.
Which format should you pick? A decision table
This table is our own reading of the three pages above, not a publisher rule.
| Your figure | Best choice | Why | Watch out for |
|---|---|---|---|
| Bar chart, line graph, flowchart, schematic | EPS or PDF (vector) | Nature and Elsevier both prefer vector for line art; all three publishers accept EPS | Embed fonts or convert text to outlines |
| Western blot, microscopy, gel, photograph | TIFF | Nature prefers TIFF for photographic images; Elsevier recommends TIFF for pixel images | 300 dpi minimum at final size; do not upscale |
| Photo with arrows and labels on top | Layered PSD or TIFF for Nature; flattened TIFF for PLOS ONE | Nature wants layers kept so labels stay editable; PLOS requires flattened TIFF | Keep the layered master; flatten only the copy for PLOS |
| Multi-panel figure mixing charts and photos | EPS or PDF if the journal allows; otherwise a single flattened TIFF | Nature lists figures combining text, line art and photographs under its vector formats | Check final column width |
| Your tool only exports SVG or PNG | Convert to EPS, PDF or TIFF first | None of the three pages lists SVG or PNG | See the conversion steps below |
| Slide or screenshot figure | TIFF (or Office file if the journal accepts it) | Elsevier and Nature accept Office files as a fallback | Slides are often 72–96 dpi; check the resolution |
What about size and resolution?
The three pages agree on one number: 300 dpi is the floor for pixel images. Nature says photographs must be at least 300 dpi at the maximum size they will be used, and that artificially raising the resolution in an artwork program will not improve quality. PLOS says the same about re-creating a low-resolution figure rather than resampling it. See our journal figure DPI guide for the full breakdown.
Some arithmetic that follows (our calculation, not a publisher statement): at 300 dpi, PLOS's minimum width of 789 pixels is 2.63 inches and its maximum of 2250 pixels is 7.5 inches. A 7.5-inch-wide figure needs at least 7.5 × 300 = 2250 pixels across. A vector file has no fixed pixel count, which is why vector is the safer choice for charts and diagrams.
How do you convert SVG to EPS, PDF or TIFF?
- Open the SVG in a vector editor (Illustrator or Inkscape; PLOS names both) and check that fonts render. If a font is missing, the preview will substitute one.
- Pick your fonts early. Elsevier recommends Arial, Courier, Symbol or Times; PLOS says Arial, Times or Symbol. Using one of those avoids substitution.
- Export or save as EPS or PDF, embedding fonts or converting text to outlines.
- If the journal needs TIFF, export at the final printed size at 300–600 dpi, then flatten and apply LZW compression if the journal asks for it (PLOS does).
- Open the exported file once in a viewer that is not your editor, and check text, line weights and colours.
- Keep the SVG master. If a reviewer asks for changes, you edit the vector and re-export instead of redrawing.
If your figure only exists as a PNG or JPG, FigPad's SVG converter accepts PNG, JPG, BMP and WebP uploads and produces an editable SVG; it requires sign-in and uses credits, per the tool's own FAQ. Tracing a raster image gives you a vector file but not the original data, so check text and thin lines after conversion.
Where does FigPad fit?
Per FigPad's live pricing page, checked 16 November 2026, layered SVG export is included on every plan including the free one, exporting an editable SVG costs 4 credits (re-exporting the same version is free), and PPTX, PNG and JPG are also available. The page describes the SVG as layered, so text, arrows and shapes remain separate editable objects, rather than a single traced group. That makes SVG a good master: you can edit it in FigPad's canvas, Illustrator or Inkscape, and then export to the format your journal asks for. For why layers matter, see Layered SVG for Scientific Figures. FigPad is our own product, so treat this as a description of where it fits in the workflow, and confirm your journal's requirements yourself.
FAQ
Do journals accept SVG?
On the three pages we read (Nature, Elsevier, PLOS ONE, all 16 November 2026), SVG is not listed as an accepted figure format. Some journals may accept it, so check your journal's guide for authors; otherwise convert to EPS, PDF or TIFF.
Is EPS or TIFF better?
It depends on the figure. Nature and Elsevier prefer vector (EPS) for line art and TIFF for photographs or pixel images. PLOS ONE accepts both and says TIFF tends to be easier to work with.
Is PNG acceptable for journal figures?
None of the three pages lists PNG. If your figure is a PNG, convert it to TIFF at the required size and resolution, or re-create it as a vector.
What resolution do I need?
At least 300 dpi for pixel images at the final printed size on all three pages. Nature and PLOS give 300–600 dpi. Do not upscale a small image.
Should I keep layers?
Nature asks for layered PSD or TIFF for photographs with labels, and for editable, unflattened vector artwork. PLOS ONE requires flattened TIFFs with no layers. Keep a layered master and flatten copies as each journal requires.
Key takeaways
- Vector (EPS or PDF) for charts and diagrams; TIFF for photographs. SVG and PNG were not listed on any of the three pages we read.
- 300 dpi is the minimum for pixel images at final size; never upscale.
- Embed fonts or convert to outlines in EPS, and stick to Arial, Times, Courier or Symbol.
- Keep an editable master (layered SVG or PSD) and export per journal.
- Journal-specific guides override these publisher pages. We could not read Science or Cell Press for this article.
Sources: Nature, Elsevier and PLOS ONE pages linked above, all read on 16 November 2026, and FigPad's pricing page and SVG converter page, checked the same day. Publishers update these pages, so verify the current versions in the week you submit.

