Skip to main content

Graphical Abstract Size and Format Requirements by Journal (2026)

FigPadNov 16, 2026
Graphical Abstract Size and Format Requirements by Journal (2026)

There is no single graphical abstract size: Elsevier asks for at least 1328 × 531 px (a 2.5 : 1 strip) at 300 dpi, Cell Press asks for a 1200 × 1200 px square at 300 dpi, ACS wants a graphic no larger than 3.25 × 1.75 inches submitted at actual size, and the Wiley guideline we checked sets only a 300 dpi minimum and a 12–16 pt sans-serif font. The shapes differ too, from a wide strip to a square, so an image built for one journal rarely fits another without redrawing. This guide puts the four sets of rules next to each other. We opened the Elsevier, ACS and Wiley documents on 14 November 2026; the Cell Press file is flagged below because we could not open it directly. A journal's own guide for authors always overrides a publisher-level page, so treat this as a map, not a ruling.

What are the graphical abstract requirements at each publisher?

Publisher Size Shape Resolution File types Font
Elsevier Minimum 1328 × 531 px (w × h); larger files keep the 500 : 200 ratio Wide strip, 2.5 : 1 300 dpi minimum TIFF, EPS, PDF or MS Office files preferred Times, Arial, Courier or Symbol, large enough for a 200 px-high view
Cell Press 1200 × 1200 px Square 300 dpi TIFF, PDF, JPG Arial, 8–12 pt
ACS No larger than 3.25 × 1.75 in (about 8.25 × 4.45 cm), submitted at actual size Wide, about 1.86 : 1 TIFF at 300 dpi (colour) or 1200 dpi (black and white); EPS in RGB TIFF or EPS Sans serif such as Helvetica, preferably 8 pt, no smaller than 6 pt
Wiley (guideline PDF we checked) No pixel size stated; provides two templates Not stated 300 dpi minimum TIFF, EPS, PPT, JPG, BMP, DOC or PDF Sans serif such as Arial or Helvetica, 12–16 pt

Sources: Elsevier's graphical abstract page, ACS Guidelines for Table of Contents/Abstract Graphics (updated 28 February 2024) and the Wiley Guidelines for graphical abstracts, all opened 14 November 2026. Cell Press: graphical abstract guide, see the note in the Cell section. The ACS shape ratio is our own arithmetic (3.25 ÷ 1.75).

What does Elsevier require?

Elsevier's page asks for an image of at least 1328 × 531 pixels at a minimum of 300 dpi, and says that if you submit a larger image you should "use the same ratio (500 wide x 200 high)". ScienceDirect scales the image proportionally into a 500 × 200 pixel window, and the font must stay readable in a view only 200 pixels high. Preferred file types are TIFF, EPS, PDF or MS Office files. Elsevier also says no extra text, outline or synopsis should be added, any label must be inside the image file, and the image should have no unnecessary white space or a "graphical abstract" heading.

Elsevier's generative AI policy for journals adds a rule on tools, which we covered in Elsevier Graphical Abstract Requirements in 2026 (policy page read on 12 November 2026). For the rest of an Elsevier submission, see Elsevier Artwork Requirements in 2026.

What does Cell Press require?

As returned by a search index on 14 November 2026, the Cell Press graphical abstract guide lists the technical requirements as an image 1200 pixels square at 300 dpi, Arial at 8–12 points ("smaller fonts will not be legible online"), preferred file types TIFF, PDF and JPG, and says abstracts made with BioRender are accepted if the author follows Cell Press's template and has the correct permissions.

Two cautions. First, we could not open the PDF directly from our server on that day (the request was blocked), so open the file yourself before you rely on these numbers. Second, a third-party summary we also read quotes an older version of the guide as "5.5 inches square at 300 dpi" with Arial 12–16 pt, which is a different size, so versions of this guide have differed. If your target is a Cell Press journal, use the version linked from that journal's own author page. For the wider artwork rules, see Cell Press Figure Guidelines in 2026.

What does ACS require?

ACS calls it a Table of Contents/Abstract graphic. Its guideline (updated 28 February 2024) says to submit the graphic at the actual size to be used for the TOC, in an area no larger than 3.25 × 1.75 inches (about 8.25 × 4.45 cm). Save it as TIFF at 300 dpi for colour or 1200 dpi for black and white, or as EPS in RGB colour mode with fonts converted to outlines or embedded. Use a sans serif font, preferably 8 pt and no smaller than 6 pt.

Our arithmetic, not ACS's: at 300 dpi, 3.25 × 1.75 inches is 975 × 525 pixels. ACS also has content rules that other publishers do not spell out the same way: the graphic must be entirely original, unpublished artwork created by one of the coauthors; it should not include a photograph, drawing or caricature of any person; and it should not include currency, stamps or trademarked items such as company logos. Label the graphic "For Table of Contents Only" and put it on the last page of the manuscript. It can also be uploaded as "Graphics for manuscript".

What does Wiley require?

Wiley's journals set their own rules, and the guideline PDF we opened is a general one on onlinelibrary.wiley.com, so confirm your journal. It says the graphical abstract should be provided with a white background in a standard file format (TIFF, EPS, PPT, JPG, BMP, DOC or PDF) at at least 300 dpi, in a sans-serif font such as Arial or Helvetica at 12–16 points. It should present the main findings and be self-explanatory, use as little text as possible, be uploaded as an image and be labelled "Graphical Abstract". It should not include excess details from previous literature, or a legend, synopsis or other additional text. The PDF points authors to two templates and does not state a pixel size in the text we read.

Note the conflict with Elsevier: Wiley's guideline asks for the image to be labelled "Graphical Abstract" at upload, while Elsevier asks you not to put that heading inside the image. The two are not strictly contradictory (a label at upload is not a heading in the picture), but it is a reason not to reuse one finished file blindly.

How do you reuse one graphical abstract across journals?

The mistake that costs the most time is exporting a finished image at one size and then stretching it. Instead:

  1. Choose the target journal first and open its guide for authors, not only the publisher page.
  2. Build the layout on the target's canvas. A 2.5 : 1 strip for Elsevier, a square for Cell Press, a short wide frame for ACS. Do not crop a square design into a strip.
  3. Keep the content in editable layers. Icons, labels and arrows should be separate objects so you can re-flow them when you resubmit elsewhere after a rejection. This is the use case for a layered SVG or an editable PowerPoint file; see Layered SVG for Scientific Figures in 2026.
  4. Test at the display size. Export a copy at 200 px high for Elsevier or at the actual 3.25 × 1.75 inch size for ACS, and check that every label is legible.
  5. Check fonts and file type last. Convert to TIFF, EPS or PDF where the publisher prefers it, and open the exported file once before uploading.
  6. Check the AI rules. Publisher policies on AI-generated images differ and change; see Can You Use AI-Generated Images in a Paper? before you submit an AI-assisted image.

For a step-by-step build, see How to Make a Graphical Abstract in 2026. FigPad's graphical abstract template page shows common canvas sizes, and the graphical abstract generator makes a first draft that you edit on the canvas. Per the live pricing page on 14 November 2026, paid plans include layered SVG and editable PPTX export; those are not the TIFF, EPS or PDF files some publishers prefer, so plan a conversion step.

FAQ

What is the standard size for a graphical abstract?

There is no standard. Elsevier asks for at least 1328 × 531 px, Cell Press's guide asks for 1200 × 1200 px, and ACS caps the graphic at 3.25 × 1.75 inches. Use the guide of the journal you are submitting to.

Should a graphical abstract be a square or a wide strip?

It depends on the publisher: Cell Press asks for a square, while Elsevier and ACS ask for wide formats. The shape follows from where the image is displayed, so designing for the wrong shape means the journal will scale it down or you will have to redraw it.

What resolution does a graphical abstract need?

The documents we read ask for 300 dpi: Elsevier (minimum), Cell Press and Wiley (minimum), and ACS for colour TIFF files, with 1200 dpi for black-and-white TIFF.

Can I use a different file format than the one a publisher prefers?

Publishers name preferred types (Elsevier: TIFF, EPS, PDF, Office; ACS: TIFF or EPS; Cell Press: TIFF, PDF, JPG). Whether other types are refused is not stated in the pages we read, so ask the editorial office or export to a preferred type.

Do these requirements change?

Yes. ACS dates its guideline February 2024 and Elsevier says to follow the journal's guide for authors, so check the current version in the week you submit.

Key takeaways

  • Elsevier, Cell Press, ACS and Wiley ask for different shapes and sizes, so build on the target journal's canvas from the start.
  • 300 dpi is the common resolution floor, with ACS asking for 1200 dpi on black-and-white TIFF.
  • Fonts are sans serif in most guides, from 6 pt (ACS minimum) to 16 pt (Wiley).
  • Check the journal's own guide for authors; it overrides the publisher-level page, and Cell Press's guide has appeared in different versions.
  • Keep an editable layered source so that a rejection does not mean redrawing the figure.

Elsevier, ACS and Wiley documents opened on 14 November 2026; Cell Press figures as returned by a search index the same day and not verified against the PDF.

Start making professional scientific figures today.