For most journals in 2026, submit your figures in RGB unless the journal tells you otherwise. Nature recommends RGB and says it will convert colour figures to CMYK itself for print. PLOS ONE asks for RGB (8 bit/channel) or grayscale only. CMYK is an option when you need to control exactly how a printed figure looks, but then you should do the conversion yourself and check the result.
What do the publishers say about colour mode?
These are the pages we opened on 18 November 2026:
- Nature (final submission guide): "Colour artwork can be provided in RGB (recommended) or CMYK format." Nature explains that screens use red, green and blue pixels while four-colour printing uses cyan, magenta, yellow and black inks. It recommends RGB because RGB has a wider gamut and reproduces fluorescent colours more faithfully when viewed digitally. RGB figures keep their colour space online but are automatically converted to CMYK for the printed journal, which, in Nature's words, often affects appearance: brighter colours are likely to appear muted and contrast between coloured areas may be reduced. If you supply CMYK instead, Nature asks you to do the RGB-to-CMYK conversion before submitting so you can see the effect and adjust. For online-only Extended Data figures, Nature asks for RGB (not CMYK) for maximum colour saturation and smaller file size.
- PLOS ONE (figure guidelines): the colour mode requirement is "RGB (8 bit/channel) or grayscale only." PLOS's own export instructions for tools such as Prism and Minitab also specify RGB.
- Elsevier (artwork overview): the overview page we read covers file formats (EPS, PDF, TIFF, JPEG), fonts and embedding, but we did not find an RGB or CMYK instruction on it, so we make no claim about Elsevier's colour mode here. Check the journal's own guide for authors.
- Science (AAAS) and Cell Press: we could not read their figure pages with our automated fetch (the Science page returned an access error on 18 November 2026), so we make no claim about them. Check them directly.
RGB vs CMYK: what is the practical difference?
| RGB | CMYK | |
|---|---|---|
| Built from | Red, green, blue light | Cyan, magenta, yellow, black ink |
| Natural home | Screens, online figures, web PDF | Printed pages |
| Gamut | Wider, per Nature | Narrower; bright colours can look muted |
| Nature's position | Recommended | Allowed, convert and check it yourself |
| PLOS ONE's position | Required (or grayscale) | Not listed |
The same figure can look different in the two modes, because some saturated RGB colours simply have no CMYK equivalent. That is why a figure with vivid fluorescence colours can look flatter after conversion.
A safe default workflow
- Read the target journal's colour-mode line first. If it names a mode, use that mode and stop.
- If the journal is silent, work and export in RGB. It is the mode Nature recommends and PLOS ONE requires, and most figure software defaults to it.
- Pick colours that survive conversion. Avoid relying on a very bright, saturated colour to separate two categories; use differences in lightness or add labels or patterns as well.
- If you must supply CMYK, convert before you submit and look at the converted figure, as Nature advises. Do not assume the preview you saw in RGB is what will print.
- Keep the original. Archive the RGB master so you can re-export if a reviewer or editor asks for a different mode.
- Check grayscale too. PLOS ONE accepts grayscale, and some readers print papers in black and white.
Where does the figure format come in?
Colour mode is separate from file format. A vector figure (SVG, EPS, PDF) and a TIFF can each be RGB or CMYK, and journals set the two requirements independently. For the format question, see our SVG vs PNG vs TIFF vs EPS decision table, and for resolution see our DPI requirements guide.
Making the fix when a reviewer or editor asks
The common failure is not choosing the wrong mode up front. It is being asked late to change a colour or re-export, when the figure is a flat picture. A figure you can still edit, with text as text and shapes as separate objects, can be recoloured and re-exported in minutes. FigPad generates scientific figures as layered SVG, with element edits in the canvas, and layered SVG export is available on every plan including Free (see the pricing page for current plans). Open the SVG in the tool you use for final colour management, and check the target journal's colour mode before you export.
FAQ
Does Nature accept CMYK figures? Yes. Nature's guide says colour artwork can be provided in RGB (recommended) or CMYK.
Will my RGB figure be printed in RGB? Print uses CMYK inks. Nature states that RGB figures are automatically converted to CMYK for the printed journal, while the online version keeps RGB.
Does PLOS ONE accept CMYK? Its figure guidelines list the colour mode as RGB (8 bit/channel) or grayscale only.
Should I convert my figures to CMYK myself? Only if the journal asks for it or you want to control the printed result. If you do, convert and check the result before submitting.

